Magnus Light | Lightbars

LIGHTBARS

Magnus lightbars are designed for all kind of phases like; seedlings, tissue culture, cuttings, multi-layer flowering and supplementary light. These lightbars ensure a better extreme root development and faster and better growth in flowering.

ENERGY SAVINGS UP TO 75%

HIGH EFFICENCY

20% MORE CROP GROWTH

PRODUCES UNIFORM PLANTS

FASTER ROOT DEVELOPMENT

MORE INTERNODES

LONG LIFESPAN

SPECIAL LIGHT SPECTRUM

CLONEKIT 120CM

Magnus Clone kit are the perfect solution for grownig your cuttings in trays. Optimized for use in a multi-layer growth system.

- Lightsbars: 3x 120cm
-   Power consumption: 15 Watt per lightbar
- PPFD 85 μmol (distance 100mm)
-    Advised height: at least 25cm above the canopy
-    Footprint: 60x120 cm
-    Light spectrum RBW/RBS
-    Weight: 0.19 kilogram per lightbar
-    Dimensions: W1200xH17mmx8mm
-    Warranty: 2 years

CLONEKIT PRO 60CM

The Linear lights contain a color spectrum that meets the needs of the crop. Not comparable with that of a fluorescent fixtures. The Clonekit pro is suitable to use for clones and seedlings

- Lightsbars: 2x 60cm
-   Power consumption: 15 Watt per lightbar
- PPFD 293 μmol (distance 200mm)
-    Advised height: at least 25-40 cm above the canopy
-    Footprint: 40x60 cm
-    Light spectrum: RBW/RBS
-    Weight: 0.81 kilogram per lightbar
-    Dimensions: W600xH45mmx19mm
-    Warranty: 2 years

CLONEKIT PRO 120CM

The Linear lights contain a color spectrum that meets the needs of the crop. Not comparable with that of a fluorescent fixtures. The Clonekit pro is suitable to use for clones and seedlings

- Lightsbars: 2x 120cm
-   Power consumption: 30 Watt per lightbar
- PPFD 293 μmol (distance 200mm)
-    Advised height: at least 25-40 cm above the canopy
-    Footprint: 60x120 cm
-    Light spectrum: RBW/RBS
-    Weight: 1.62 kilogram per lightbar
-    Dimensions: W1200xH45mmx19mm
-    Warranty: 2 years

INTERLIGHT

The Magnus interlight is the perfect supplementary light for leafly tall plants. It gives bi-directional light and should be positioned in between the rows of plants. The Magnus interlight makes it possible to give sufficient light to lower branches and areas that are not sufficiently covered by primary light, due to a dense canopy or overhanging neighboring plants.

The magnus interlight suits tall and leafly plants and can be used for both growing and flowering phase. It creates more balanced growth and increases production by up to 30%, depending on the crop. It can be installed in serial connection, and the installation height can be adjusted as plants grow.

- Lightbars: 1x 120cm
-   Power consumption: 50 Watt per lightbar
- PPFD 150 μmol (distance 250mm)
-    Advised height: Sides may touch the plant
-    Footprint: L1200xH60 cm
-    Light spectrum: RBS
-    Weight: 1.9 kilogram
-    Dimensions: W1200xH40mmx60mm
-    Warranty: 2 years

FACTORY CLONE

Magnus has the ideal solution to increase and speed up production with the Magnus Light Factory. A factory is much less labor intensive and significantly reduces energy cost, because of the low power consumption of the LED's

An extra advantage is a valuable space reduction, thanks to it compact design.

With the magnus factory, a large number of seedlings or clones can be produced in a limited working space. Light intensity and power are easy to control, giving growers the flexibility to speed up or slow down production.

Our Factory contains 5 layers, 2 LED lights per layer.

- Lightbars: 10x 120cm
-   Power consumption: 30 Watt per lightbar
- PPFD 200 μmol (distance 100mm)
-    Footprint: L1200xW60xH25-H50
-    Light spectrum: RBW/RBS
-    Weight: 1.62 kilogram per lightbar
-    Dimensions: W1200xH45mmx19mm
-    Warranty: 2 years

FACTORY PRO